SF MASONARY MORTAR is a pre mixed ready to use cement based mortar for masonry work which ensures quality consistency. MASONARY HIGH STRENGTH MORTAR is a mixture of graded inert fillers, additives and binder which gives strength beyond 30 Mpa after 28 days. The mortar is specially formulated & manufactured to produce masonry mortar for use in brick, block & stone masonry construction.

– Ready-mix factory controlled mortar.
-Excellent permeability resistant.
-Reduces drying shrinkage cracks
-Improved labour productivity hence reduces the cost.
-Good bonding, less rebound hence reduces wastage during plastering.
-Can be used at the thickness of 10 to 12 mm.

– Brick & AC blocks mortar jointing.
-Stone & rock walls
-Paving bedding.
-Minor plastering repairs.
-Fly ash bricks
-Concrete blocks

Composition & Materials
SFMASONARY MORTAR is manufactured using masonry cement complying with existing norms for masonry cement & dried sand of zone 1 and 2.
Specification Clause
SF MASONARY MORTAR is a blended based cement mortar used for masonry.


1 Physical appearance Powder
2 Colour Cement grey
3 Air Entrainments 8 to 10% when mixed
4 W/P Ratio 0.16 ± 0.01
5 Workability Very good
6 Hard dry 24 hours
7 Pot life 90 minutes


Sr. No Age in days Compressive strength in Mpa
1 1 day 10-12 Mpa
2 3 days 17-18 Mpa
3 7 days 25-26 Mpa
4 28 days 35-36 Moa

Shelf life & Storage
9 months if stored min cool, dry shade.
– Good workman ship principles are required for successful application, including proper filling of
head & bed joints.
-Take precise quantity of water & pour into mechanical mixer or can be loaded in to plastering
-Add water gradually, mixing thoroughly until a smooth mix is achieved.
-Clean the bricks and take out loose particles.
-Wet the bricks and apply SF MASONARY MORTAR to achieve uniform thickness and leveled the
surface and keep another brick on to the mortar.
– Place a layer 15-20mm of mortor.
– Pointing is easier after the mortar has initially set.
-Mix SF MASONARY MORTAR after adding water should be used within 90 minutes.
CURING Curing is 4.5 days.

Packing & Coverage
40 kgs of bag.
Health & Safety
SF MASONARY MORTAR is non hazardous It should not be swallowed or allowed to come into contact with skin or eyes. Suitable protective goggles and gloves should be worn. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. If swallowed, seek medical attention immediately, do not induce vomiting.

Quality Assurance
SAFFRON manufactures entire range of construction chemicals under compliance of existing norms.

Technical Services
While new advances and changes will take place but one thing will never change is quality and meeting special needs of our customers. We are eager to work with you in development of new product and solve your problem